Water treatment plants create foam which needs to be suppressed to maintain efficiency. Both silicone and non-silicone antifoams can be used to either knock down foam after build up or as an additive to reduce the initial build-up of foam. Product selection depends very much upon the pH value, temperature, water and the concentration or dosing requirement.
CHT antifoams are available either as high percentage concentrated products for pre-dilution or ready to use solutions.
Non-silicone antifoams are particularly useful for use in biological plants where the use of a silicone may interfere with the growth of desirable bacteria.
Code | Description | Request Sample | TDS | SDS |
---|---|---|---|---|
XAF 102 | 100% active self dispersing antifoam compound | |||
JAF 100 | 100% active silicone defoamer for extreme pH | |||
XAF 100 | 100% active silicone defoamer for extreme pH | |||
XAF 10 | 10% active water dispersible silicone antifoam | |||
XAF 20 | 20% active water dispersible silicone antifoam | |||
XAF 30 | 30% active water dispersible silicone antifoam | |||
JPA 15 | Silicone antifoam powder | |||
AF 1316 | highly active silicone emulsion based on activated polydimethylsiloxane. It has been specially formulated to prevent, control or destroy foam in liquid systems. | |||
AF 1220 | highly active silicone emulsion based on activated poly-dimethylsiloxane. It has been specially formulated to prevent, control or destroy foam in liquid systems. |